subscribe to tools for sale in detroit
741 tools for sale in detroit
Kennedy Tool Box Top Bottom Side Cabinet Scs 600 details visit
02/08/2012
in good to excellent condition $600 cash is King
still posted its still for sale..............;.
Location: SCS
it's NOT ok to contact this poster with services or other commercial interests
Black Decker Hedge Trimmer For Sale Wayne County 20 details visit
02/08/2012
Black & Decker Hedge Trimmer For Sale
Used only a few times
Excellant Condition
Serious Replies only
see picture attached
Location: Wayne County
it's NOT ok to contact this poster with services or other commercial interests
Craftsman Chain Saw 18 40cc Detroit 75 details visit
02/08/2012
GREAT DEAL!!!
CRAFTSMAN CHAIN SAW 18'' / 40cc
Brand New chain
Works like new & also comes w/ a black case.
$75
Contact info. 313-729-7052 call only
Location: DETROIT
it's NOT ok to contact this poster with services or other commercial interests
Home Project Spot Light For Sale Wayne County 15 details visit
02/08/2012
Home Project Spot Light For home projects
excellant condition for your next project
serious replies only
Location: Wayne County
it's NOT ok to contact this poster with services or other commercial interests
Black Decker 2 1 2 Hp Circular Saw For Sale Wayne County 25 details visit
02/08/2012
Black & Decker 2 1/2 HP Circular Saw For Sale
Excellant
serious replies only
see pictures attached
Location: Wayne County
it's NOT ok to contact this poster with services or other commercial interests
Century Professional Mig Wire Feed Welder Clio Mi 450 details visit
02/08/2012
Century Professional Mig Wire Feed Welder #117-079-000 H511887 Part #83170; 9/28/00; Welds 26 gauge steel up to 5/16", asking $450
Location: Clio, MI
it's NOT ok to contact this poster with services or other commercial interests
Ryobi 200 Piece Drilling And Driving Bit Set Wayne County 25 details visit
02/08/2012
Ryobi 200 Piece Drilling and Driving Bit Set
Contents include:
33 Black Oxide High Speed Steel Drill Bits for drilling in wood, plastic, and metals. Sizes are from 1/16" to 3/8"
36 Bronze Oxide High Speed Steel Drill Bits for drilling in wood, plastic
, and metals. Sizes are from 1/16" to 5/16"
5 Spade Bits for drilling large holes in wood. Sizes are 1/2", 5/8", 3/4", 1", 1 1/4".
12 Brad Point Bits for precision drilling in wood. Sizes are from 1/8" to 3/8".
3 Drill stops to put on brad point drill bits for drilling fixed depth holes in wood. Sizes are 3/16", 5/16", 3/8"
20 Carbide Tipped Masonry Bits for drilling in martar, brick, block, and concrete. Sizes are from 1/8" to 1/2"
1 Magnet bit holder.
10 Nut Drivers for fast driving of nuts, bolts,and hex head screws. Sizes are from 3/16" to 1/2"
56 1" Screw driving bits to use with magnetic bit holder.
21 2" Power bits place these directly into your chuck for driving screws.
1 Allen Key
1 Center Punch
1 Countersink
One Carrying Case with handle.
Location: Wayne County
it's NOT ok to contact this poster with services or other commercial interests
Tools Tools Tools For Sale Wayne County details visit
02/08/2012
I have alot of tools
Black & Decker Electric Drill
Craftsman Tool Box filled with tools
Brand New Tool Set Never been used
Black & Decker Single Speed Jig Saw
Black & Decker Hedge Trimmer (Electric)
Home Project Spot Light
Post Hole Hand Digger
Antique Battery Charger 6 and 12 volt
Black & Decker Yard Cleaner blower/vacuum
Trimble Tri Max Tri Pod Stand
Black & Decker 2 1/2 HP circular saw
See some of the pictures, if you see a specific item and need a picture please email me and let me know
Serious replies only
Location: Wayne County
it's NOT ok to contact this poster with services or other commercial interests
Antique Generator Craftsman 1400 Watt 35 Hp Wayne County 65 details visit
02/07/2012
Antique Generator
Works and Runs Great
All Orignal Parts
Craftsman 1400 Watt 3.5 HP Generator
See Pictures attached (Serious Replies Only)
Asking 65.00 OBO
Location: Wayne County
it's NOT ok to contact this poster with services or other commerci
al interests
Craftsmen Table Saw 10 Downriver 65 details visit
02/07/2012
very good condition table saw, 10'' craftsman. works great, very powerful. 313-414-9892
Location: downriver
it's NOT ok to contact this poster with services or other commercial interests
Berger Transit Level 250 details visit
02/07/2012
Berger level/ transit level comes with tripod and rod.
Asking 250.00 OBO
it's NOT ok to contact this poster with services or other commercial interests
Duff Lynx 1 Ton Electric Chain Hoist details visit
02/07/2012
DUFF LYNX 1 TON ELECTRIC CHAIN HOIST
DAYTON 3 PHASE MOTOR
FIRST $550.00 TAKES IT.
it's NOT ok to contact this poster with services or other commercial interests
3 Acetylene Hoses details visit
02/07/2012
3 Acetylene hoses
15.00 Each
OR
40 for all
it's NOT ok to contact this poster with services or other commercial interests
Haas Vf2 Vertical Machining Center 25900 details visit
02/07/2012
HAAS #VF2 VERTICAL MACHINING CENTER
S/N 3473 NEW 1994
TABLE SIZE -------------------------------- 14" X 36"
TRAVEL ---------- ( X AXIS ) -------------- 30"
TRAVEL ---------- ( Y AXIS ) -------------- 16"
TRAVEL ---------- (
Z AXIS ) -------------- 20"
SPINDLE NOSE TO TABLE --------------------- 4" TO 24"
SPINDLE TAPER ----------------------------- CAT 40
MAXIMUM CUTTING FEEDRATE ------------------ 200 IPM
RAPID TRAVERSE -- ( X, Y, Z ) ------------- 500 IPM
MAXIMUM WEIGHT ON TABLE ------------------- 750 LBS.
SPINDLE SPEED RANGE ----------------------- 0 TO 7500 RPM
SPINDLE DRIVE ----------------------------- 10 HP 208-230/3/60
APPROXIMATE MACHINE WEIGHT ---------------- 8,000 LBS
APPROXIMATE MACHINE DIMENSIONS ------------ 92"(LR) X 88"(FB) X 93"(H)
EQUIPPED WITH ---
4TH AXIS READY W/SERVO CARD
LOW HOURS: CYCLE START 5352 HRS., FEED CUT 4152 HRS.
HAAS CNC CONTROL
2 SPEED GEARED HEAD
RIGID TAPPING
20 AUTOMATIC TOOL CHANGER
PROGRAMMABLE COOLANT NOZZLE SYSTEM
AUGER TYPE CHIP CONVEYOR
FULLY ENCLOSED
You can contact us at,
515-509-7772
www.HimesMachinery.com
it's NOT ok to contact this poster with services or other commercial interests
Hardinge Cobra 65 Cnc Turning Center Fanuc Controls 26500 details visit
02/07/2012
HARDINGE COBRA 65 CNC LATHE,10" 3-JAW CHUCK, WITH FANUC 21iT CNC CONTROL
S/N C65-344 NEW 2000
SPECIFICATIONS:
SWING OVER BED: 21.3"
MAX. MACHINING DIAMETER: 12.4"
MAX. BAR DIAMETER: 2.5"
MAXIMUM TURNING LENGTH WITH COLLET: 31"
RAPID TRAVERSE: 472/94
5 IPM
SPINDLE BORE: 3.1"
SPINDLE SPEEDS: 36 -- 4,500 RPM
TOOL CAPACITY: 12
SPINDLE DRIVE MOTOR: 15 HP
MACHINE WEIGHT: 9,900 LBS
ELECTRICS: 240 VOLTS, 3 PH, 60 CYC
EQUIPPED WITH
FANUC 21iT CONTROL
10" 3-JAW CHUCK --
SPINDLE ACCEPTS 25C COLLETS
CHIP CONVEYOR
COOLANT SYSTEM
MISC TOOLHOLDERS
AUTO DOOR
NO TAILSTOCK
You can contact us at,
515-509-7772
www.HimesMachinery.com
it's NOT ok to contact this poster with services or other commercial interests
Hilti Hammer Drill Clinton Twsp 80 details visit
02/07/2012
Hilton hammer drill model TE 2-M. Works perfect! Awesome powerful drill with lots of speed and torque.
Cost $240 new.
John 586-601-5896. Call /text /emails
May trade for small pancake compressor
Location: Clinton Twsp
it's NOT ok to contact this
poster with services or other commercial interests
Bridgeport Cnc Vertical Machining Center Tons Of Holders Tooling 27900 details visit
02/07/2012
BRIDGEPORT #VMC1000 CNC VERTICAL MACHINING CENTER
S/N 1000C-012 NEW 1998
TABLE SIZE -------------------------------- 19.3" X 45.3"
TRAVEL --------------- ( X ) -------------- 40.2"
TRAVEL --------------- ( Y ) -------
------- 20.08"
TRAVEL --------------- ( Z ) -------------- 19.7"
SPINDLE TAPER ----------------------------- BT40
SPINDLE SPEED RANGE ----------------------- 40 TO 6,000 RPM
RAPID TRAVERSE RATE -- ( X, Y, Z ) -------- 787 IPM
SPINDLE DRIVE ----------------------------- A.C.
APPROXIMATE MACHINE WEIGHT ---------------- 9,000 LBS
EQUIPPED WITH ---
BRIDGEPORT DX32 CNC CONTROL WITH HARD DRIVE AND NETWORK CARD
22 STATION TOOL CHANGER
FULL ENCLOSURE
COOLANT SYSTEM
RIGID TAPPING
LARGE ASSORTMENT OF TOOL HOLDERS AND TOOL CART
You can contact us at,
515-509-7772
www.HimesMachinery.com
it's NOT ok to contact this poster with services or other commercial interests
Smith Oxy Acetelyne Torchs Eastpointe 200 details visit
02/07/2012
Commercial duty Smith oxy hoses gauges and torch. This is extremely heavy duty stuff. In excellent condition.
Location: Eastpointe
it's NOT ok to contact this poster with services or other commercial interests
Hurco Bmc 30 Ssm Cnc Machining Center Ultimax Ssm Control 28800 details visit
02/07/2012
HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER
30" X 18" X 24" // ULTIMAX SSM CONTROL
S/N B3SM91001047BD
NEW 1997
SPECIFICATIONS:
TABLE
WORKING SURFACE: 40.1" X 15.7"
TABLE T-SLOTS: 3 X .71" ON 4.92" CENTERS
TABLE LOAD W/UNIFORM DIST.: 1,100 LBS
SPINDLE MOTOR
HORSEPOWER, (30 MIN.): 10 HP
HORSEPOWER, (CONTINUOUS): 7.5 HP
TYPE: 3 PHASE AC 240 V, DUAL WOUND
SPINDLE
TYPE: CARTRIDGE # 40 TAPER
NOSE TO TABLE: 6" - 30"
CENTER TO COLUMN WAYS: 17.5"
SPEEDS: 80 - 8000 RPM
TORQUE (30 MINUTES): 105 LBS/FT AT 500 RPM
BEARINGS: ABEC-7 CLASS ANGULAR CONTACT
BEARING LUBRICATION: GREASE PACKED
ORIENTATION: ELECTRONIC
AUTOMATIC TOOL CHANGER
TOOL HOLDER: CAT 40 V-FLANGE
NUMBER OF STATIONS: 24
MAXIMUM TOOL DIAMETER: 3.9"
MAXIMUMTOOL LENGTH: 12"
MAXIMUM TOOL WEIGHT: 15 POUNDS
CHANGE TIME
TOOL TO TOOL: 7 SECONDS
CHIP TO CHIP: 9 SECONDS
AXIS MOTOR
MAXIMUM RAPID TRAVERSE, X & Y: 945 IPM
MAXIMUM THRUST RATING, X & Y: 1500 POUNDS
MAXIMUM RAPID TRAVERSE, Z: 590 IPM
MAXIMUM THRUST RATING, Z: 2415 POUNDS
AXIS TRAVEL
LONGITUDINAL (X): 30"
CROSS TABLE (Y): 18"
VERTICAL HEAD (Z): 24"
CAPABILITIES
MILLING CAPACITY (MILD STEEL): 12 CU IN/MIN
DRILLING CAPACITY (MILD STEEL): 1.25"
TAPPING CAPACITY (60% THREAD): .75" - 10"
PROGRAMMABLE FEEDRATES: 0.1 -- 300 IPM
MAXIMUM CUTTING FEEDRATES: 450 IPM
MACHINE
WEIGHT, APPROX.: 8,332 LBS
DIMENSIONS (APPROX.): 87" X 90" X 90"
SERVICE REQUIREMENTS
AIR REQUIREMENTS: 5 CFM (18 SCFM) @ 80 -- 100 PSI
COOLANT CAPACITY: 80 GALLONS
ELECTRICAL REQUIREMENTS: 19 KVA
ELECTRICS: 220 VOLTS, 3 PH, 60 CYC
STANDARD FEATURES:
AC SERVO MOTORS WITH PRECISION DOUBLE BALLNUT BALLSCREW ASSEMBLIES
FULL CHIP AND COOLANT ENCLOSURE
ISOLATED WAY LUBE SYSTEM
FLOOD COOLANT
DUAL WORKLIGHTS
EQUIPPED WITH:
ULTIMAX SSM CNC CONTROL
SINGLE SCREEN WITH 3.5" FLOPPY DRIVE
HIGH CAPACITY HARD DRIVE FOR PART PROGRAM STORAGE
PROGRAMMING POWER OF THE TRADITIONAL ULTIMAX 3/486
HURCO CONVERSATIONAL OR NC PROGRAMMING
CONCURRENT PROGRAMMING
PART ZERO SET
CUTTER COMPENSATION
CANNED CYCLES
PROGRAMMABLE MIRROR IMAGE
MID-PROGRAM RESTART FEATURE
PROGRAMMABLE SAFETY ZONES
NO-CALC PROGRAMMING
INCH/METRIC
DATE BLOCK SEARCH
WORK COORDINATES: INFINITE
INTERPOLATION
ADVANCED POCKET MILLING
CIRCLE POCKET MILLING
BOLT HOLE DRILLING
PROGRAM REVIEW
OPTIONAL SOFTWARE INSTALLED
RIGID TAP
ULTIPOCKET
You can contact us at,
515-509-7772
www.HimesMachinery.com
it's NOT ok to contact this poster with services or other commercial interests
Dayton Heavy Duty Drill Press St Clair Shores 200 details visit
02/07/2012
I have a heavy duty drill press with vise. Works like a champ just have no use for it anymore.
Location: St. Clair Shores
it's NOT ok to contact this poster with services or other commercial interests
Harris Mini Oxy Acetylene Kit St Clair Shores 300 details visit
02/07/2012
I have a Harris oxy set-up includes hoses,gauges, torch, tank, and cart. Tanks are certified by Airgas and if I am reading it right they are certified till 2014.
Location: St. Clair Shores
it's NOT ok to contact this poster with services or other com
mercial interests
Mazak Vertical Machining Center 40 X 20 X 20 Mazatrol M 32b Cnc Co 28900 details visit
02/07/2012
MAZAK #VTC-20B VERTICAL MACHINING CENTER
S/N 114948 NEW 1995
TABLE SIZE -------------------------------- 57.48" X 20.08"
TRAVEL --------------- ( X AXIS ) --------- 44.09"
TRAVEL --------------- ( Y AXIS ) --------- 20.08"
TRAVEL --------------- ( Z AXIS ) --------- 20.08"
DISTANCE SPINDLE NOSE TO TABLE TOP -------- 4.3" TO 24.4"
DISTANCE SPINDLE CENTERLINE TO COLUMN ----- 22.1"
SPINDLE NOSE ------------------------------ #40
SPINDLE SPEED ----------------------------- 7,000 RPM
TOOL MAGAZINE CAPACITY -------------------- 24
MAXIMUM TOOL DIAMETER --------------------- 3.1"
WITH ADJACENT POCKETS EMPTY ------------- 4.3"
MAXIMUM TOOL LENGTH ----------------------- 13.8"
MAXIMUM TOOL WEIGHT ----------------------- 17.6 LBS.
RAPID TRAVERSE RATE -- ( X & Y AXIS ) ----- 787 IPM
RAPID TRAVERSE RATE -- ( Z AXIS ) --------- 590 IPM
MAIN MOTOR, 5 MIN./30 MIN./CONT. --------- 15/10/7.5 HP A.C.
APPROXIMATE MACHINE WEIGHT ---------------- 12,000 LBS
APPROXIMATE MACHINE DIMENSIONS ------------ 118"(LR) X 102"(FB) X 106"(H)
EQUIPPED WITH ---
MAZATROL M32B CNC CONTROL
24 STATION AUTOMATIC TOOL CHANGER
COOLANT SYSTEM
WORK LIGHT
AUTO. LUBRICATION SYSTEM
FULL ENCLOSURE
You can contact us at,
515-509-7772
www.HimesMachinery.com
it's NOT ok to contact this poster with services or other commercial interests
Plasma Cutter Mtclemens 950 details visit
02/07/2012
THERMAL DYNAMICS MASTER/PAC-50 CAN TEXT PICS CALL 5868764339
Location: MTCLEMENS
it's NOT ok to contact this poster with services or other commercial interests
17 X 80 Colchester Cnc Turning Center Lathe Fanuc Controls 29000 details visit
02/07/2012
17" X 80" COLCHESTER CNC LATHE MODEL CNC 3000L
S/N L3180GFBSA01296 NEW 1990
SWING OVER BED ---------------------------- 17"
SWING OVER CROSS SLIDE -------------------- 10.4"
SWING IN GAP ------------------------------ 28"
LENGTH OF GAP --
--------------------------- 8.5"
DISTANCE BETWEEN CENTERS ------------------ 80"
X AXIS STROKE ----------------------------- 10.3"
Z AXIS STROKE ----------------------------- 76"
RAPID TRAVERSE RATE ----------------------- 236 IPM
SPINDLE SPEEDS ---- ( PROGRAMMABLE ) ------ 20 TO 2000 RPM
GEAR RANGES ------------------------------- 2
SPINDLE BORE ------------------------------ 3-1/8"
SPINDLE NOSE ------------------------------ D1-8" CAMLOCK
MAIN DRIVE MOTOR -------------------------- A.C.
APPROXIMATE MACHINE WEIGHT ---------------- 8,311 LBS
EQUIPPED WITH ---
FANUC #OT 2 AXIS CNC CONTROL ALORIS QUICK CHANGE TOOL HOLDER
10" 3 JAW CHUCK ( WITH HOLDERS )
16" 3 JAW CHUCK 3 POINT STEADY REST
16" 4 JAW CHUCK PROGRAMMABLE SPINDLE SPEEDS
RAPID TRAVERSE MANUAL TAILSTOCK
FULL GUARDING CHIP PAN BED
COOLANT SYSTEM
You can contact us at,
515-509-7772
www.HimesMachinery.com
it's NOT ok to contact this poster with services or other commercial interests
Storehbouse 3 Piece Tool Box Redford 60 details visit
02/07/2012
Bottom ,middle and top box. All in good working condition. Keys for bottom and middle boxes. Can't find keys for top box. Bought a new box so this one is taking up space. Any questions please email.
Location: redford
it's NOT ok to contact this poster
with services or other commercial interests
Neon Plant Make Neon Romulus Mi 1700 details visit
02/07/2012
bombarder fires pumps glass etc call ron 734 658 4445
Location: romulus mi
it's NOT ok to contact this poster with services or other commercial interests
Cst Berger Introduces The Ld 90 Dearborn 50 details visit
02/07/2012
These go for $125 RETAIL... Here is a link that you can check out yourself.
http://www.stakemill.com/index.php?main_page=product_info&products_id=2601
This is a low-cost electronic detector for rotary lasers. This detector is built tough for indoor and
outdoor use.
With the LD-90 features 2 levels of resolution so you will be able to locate your laser beam easily. Three LEDs give visual location with working range up to 400-feet. Heavy-duty magnets molded in housing for ceiling applications. The LD-90 also features an alarm to help indicate on-grade status. Co-molded rubber housing seals and protects against weather conditions.
Got this as a Birthday Present, but I have NO USE for this.
ONLY asking $50, my lose is your gain.
NIB.
Please see pics.
(313)208-5545
Please disregard the words below:
Christmas, X-mas, snow blower, powered, football, glass, xbox, ps2,steam, walmart, record, lp, 45, table, wood, waterfall, oak, xmas, replace, games, shovel, cherry, red, dark electric, ipod. ipad, i, deal, bargain, sears, mall, present, ship, export, car, truck, cap, baseball,
Location: Dearborn
it's NOT ok to contact this poster with services or other commercial interests
Dewalt 1 1 4 X 31 X 36 4 Cutter Sds Max Rotary Hammer Bit New Wyandotte 80 details visit
02/07/2012
DeWalt 1-1/4" x 31" x 36" 4-Cutter SDS Max Rotary Hammer Bit (BRAND NEW NEVER USED)
DeWalt Specifications:
• 1-1/4" Diameter
• 31" Usable Length
• 36" Overall Length • Fits all brands of SDS Max Rotary Hammers including Dewalt, Bosch, and Hilti Any questions please contact us. Thanks for looking
Location: WYANDOTTE
it's ok to contact this poster with services or other commercial interests
Work Radio Novi 75 details visit
02/07/2012
MILWAUKEE JOB SITE WORK RADIO VERY GOOD CONDITION$75NEW CLOCK , MEMORRY,BATTERIES,CALLS ONLY @313-670-3242,JOE.
Location: NOVI
it's NOT ok to contact this poster with services or other commercial interests
Tools For Sale Everything Must Go Capac Michigan details visit
02/06/2012
GARAGE FULL OF TOOLS, AIR TOOLS.HAND TOOLS EVERYTHING MUST GOOOOOOOO...... CALL US COME ON OUT........VINTAGE CAR PARTS.....810-395-7109 SHARON SALE ((((((((((((((((((((((((feb---- 9th 10th 11th )))))))) ADDRESS 13500 BURT RD. CAPAC MICHIGAN 48014
Lo
cation: Capac Michigan
it's NOT ok to contact this poster with services or other commercial interests
1
...
